Goodridge GH Brake Pads - Model No G 364 GH - Suzuki GSXR600/750 06-10 / Hayabus

GH - Sintered Metal

Free Shipping Australia Wide!

Time to grab yourself a bargain!

We have a huge range of quality Goodridge Disk Brake Pads and Drum Shoes that we need to sell ASAP, so we are running them out the door at well below retail price! We only have limited stock, so what you see below is all we have so be quick!

Description

G/GH SERIES 
Made in the USA the GH range are a sintered metal brake pad for fast street / race use. They have set the levels by which other pads are judged in the European market. Boasting the highest “GH” friction rating and a lifetime which is the envy of the competition. The GH range offers huge mileage, is perfect for hot, cold or wet conditions and provide a consistent performance throughout.

Model Number

G 364 GH

Need to find the correct pad for your make / model / year bike?

1. Click here to view the Goodridge Application guide and scroll down to find your bike and pad number.
2. Either search for the 3 digit part number in the search bar at the top left of this page, or scroll through the listings below.

Note: Make sure you remember to order 2 X sets for twin disk front end if you have one.

Fitment

SUZUKI
GSR 400 K6/K7/K8 06—08 R
GSR 600 K6/K7/K8 06—10 R
GSXR 600 K6/K7/K8/K9/L0 06—10 R
GSXR 750 K6/K7/K8/K9/L0 06—10 R
DL 1000 AL4 V—Strom ABS 14 R
GSXR 1000 K7/K8 07—10 R
GSX 1300 RK8/RK9/RL0/RL1/RL2 Hayabusa 08—12 R
GSX 1300 BKK8/BKK9/BKL0/BKL1 B—King 08—12 R
GSX 1300 RL3/RL4 Hayabusa (Brembo calipers) 13—14 R

Please note: You will need to order 1 set per caliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: we only have limited stock and it is all listed on this site.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing above for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered.