HEL PERFORMANCE BRAKE LINE KITS - ALL MODELS

Free Shipping Australia Wide!!

HEL Braided Brake Line Kits for Road and Off Road bikes
Manufactured & Assembled in Australia
 

PLEASE NOTE: If you have an ABS bike, a European bike, or a bike older than 2000 please,
DO NOT ORDER! Please contact us first so we can confirm that your model brake lines are available and we can supply them.

All makes & models

Fitting Braided Brake Lines to a bike with ABS Brakes requires more than just one brake line per caliper. Typically, if your bike has an ABS (Antilock Braking System), it will have around 5 to 7  brake lines. If you want to swap to braided lines all of these lines will need to be replaced in order for the ABS to function correctly. The downside of this is that the costs are higher for the brake line kit, usually around $300.00 - $600.00. Plus there are extra costs involved in fitting to consider. If your bike has ABS braking you will need to contact us or call us with your make / model / year for a quote.

Please note: Twin Disc front end bikes
All HEL brake line kits for Twin Disc front end bikes are supplied (unless requested otherwise) as two separate lines from the master cylinder to each front calliper and NOT one line to a splitter as some factory bikes are delivered. This is because the two-line configuration provides superior braking and performance.
 

Kits include everything required to fit, including brake lines, banjo bolts, washers etc.

Product Description

HEL Performance Brakes specialise in the manufacture of all stainless steel motorcycle brake lines and hoses in over 65 countries around the world.

With over 3,800 stainless steel brake line kits we are sure there will be something in our range for your motorcycle.

The most powerful part of your motorcycle is not the engine - it's the brakes. That's a fact! Consider this - A GSXR1000 can do a standing quarter mile in 10.8 seconds with a terminal speed of 138mph - the brakes can do the same amount of work, but in reverse, in just 6.8 seconds - and by fitting HEL Performance Stainless Steel Braided Brake Lines you can make them even more powerful!

Despite what the salesman tells you - every modern motorcycle has compromises normally instigated by accountants rather than engineers. One such compromise is the materials used for the brake hoses on your motorcycle. Rubber hoses or mild steel fittings are cheap but we all know how rubber hoses bulge under pressure, are porous and allow the brake fluid to absorb water vapor from the atmosphere and that mild steel fittings rust...

HEL Performance Braided Brake Lines are an absolute must for any racer, track day junkie, or street rider that wants immediate and effective improvement in their bike's braking performance. And for only $119.95 a line (cheaper if you buy more than one), it's almost criminal not to perform this crucial upgrade.

18 brake line colours available 

Transparent Red	Red	Orange
Transparent Yellow	Yellow	Green
Transparent Green	Neon Blue	Blue
Denim Blue	Dark Blue	Purple
Pink	Black	Carbon Look
Silver Grey	White	Clear

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FAQ -

Please note: HEL coloured banjo bolts are painted, not anodized.  Painted banjo bolts can scratch easily if not installed carefully and require more care over time than plain Stainless Steel banjo bolts. Please be sure to carefully consider whether you want coloured banjo bolts that require more care, or stainless steel banjo bolts that are much easier to keep clean and maintain.

Do I need to upgrade both front and rear lines or should I just do the fronts?
Answer -
In a racing/performance application, the front brakes on your motorcycle are used for almost 100% of the braking so it is not essential to upgrade the rear line. Factory rear lines are more than suitable for the little amount of use they get. However, if you are the type of person that likes to have a full matched set, in the scheme of things it's not that much more for the rear line and it certainly won't hurt! Plus it looks great!

Please note: ABS Bikes
Fitting Braided Brake Lines to a bike with ABS Brakes requires more than just one brake line per caliper. If your bike has ABS you will need to contact us for a quote.

Stealth Heat Shrink :
Stealth Heat Shrink is now an available option for your new stainless steel braided lines, if you want this, we can put Black Heatshrink over the ends of the line for a stealth look.

                                                                                                                                  

                                                  

We are an Australian-owned and operating business