SBS ATS Brake Pads - Model No 755ATS - Polaris

ATS Sinter

Free Shipping Australia Wide!

Time to grab yourself a bargain!

Description

The ATS compound is engineered especially for ATVs such as Arctic Cat and Polaris with plain steel brake rotors. The ATS compound is sinter metal so it provides great, predictable stopping power with very low pad and rotor wear.

Model Number

755HS

Fitment

POLARIS
250 Trail Blazer 99- ATS
250 Xplorer 4x4 00- ATS
325 Magnum 2x4,
4x4 00- 02 ATS
325 Trail Boss 00- 02 ATS
325 Xpedition 00- 01 ATS
330 Trail Boss 03- ATS
335 Sportsman
4x4 99- ATS
400 Scrambler
2x4, 4x4 00- ATS
400 Scrambler 4x4 99- ATS
400 Sport 99- 00 ATS
400 Sportsman 01- ATS
400 Trail Blazer 03- ATS
400 Xplorer L 4x4 00- ATS
425 Xpedition 4x4 00- ATS
455 Diesel EBS
4x4 99- ATS
500 Magnum 4x4 00- 01 ATS
500 Scrambler 2x4 01- ATS
500 Scrambler 4x4 98- ATS
POLARIS
500 Sportsman
EBS 4x4 98-

Need to find the correct pad for your make / model / year bike?

1. Click here to view the SBS Application guide and scroll down to find your bike and pad number (normally 3 digits)
2. Then either search for the 3 digit part number in the search bar at the top of this page, or scroll through the listings in our store to see if we have your model pads.

Note: Make sure you remember to order 2 X sets for twin disk front end if you have one. 

Please note: You will need to order 1 set per caliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: we only have limited stock and it is all listed on this site.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing above for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered.