SBS HF Brake Pads - Model No 539HF - Kawasaki KZ 400/650 / 700 /750 / 1000 /1100

HF Ceramic

Free Shipping Australia Wide!

Time to grab yourself a bargain!

Description

HF is a ceramic OEM replacement for any motorcycle not equipped with sinter metal pads. The SBS application guide will show the recommended compound for each application. The HF compound is very long lasting, rotor friendly and performs well in all conditions. HF is made using NRS technology which SBS spearheaded back in 2001. NRS eliminates the use of glue and creates a virtually unbreakable bond between the friction material and the backing plate. As with all SBS compounds meant for street use, HF meets TUV, ABE and ECE standards.

Model Number

539HF

Fitment - FRONT & REAR please contact us if you are unsure of front or rear fitment.

KAWASAKI
KZ 440 H 82- HF
KZ 650 81- HF
KZ 650 F 81- HF
KZ 700 83- HF
GPZ 750 82 HF
KZ 750 , LTD 80- 81 HF
KZ 750 84- HF
KZ 750 E 80- 81 HF
KZ 750 GT 82- HF
KZ 750 L 80- HF
KZ 750 LTD Belt Drive 83- HF
KZ 750 LTD Twin 82 HF
KZ 750 Sp. 83- HF
KZ 750 Y1, N, LTD 82- HF
KZ 1000 87- 01 HF
KZ 1000 F1 80- HF
KZ 1000 J 79- 80 HF
KZ 1000 J 81- 83 HF
KZ 1000 K, M, CSR 81- HF
KZ 1000 LTD 81- HF
KZ 1000 MKII 79- 80 HF
KZ 1000 Police 82- 01 HF
KZ 1000 ST 79- 81 HF
GPZ 1100 81- HF
KZ 1100 , Spectre 82- 83 HF
KZ 1100 GP 81- HF
KZ 1100 L1, LTD 83- HF

Need to find the correct pad for your make / model / year bike?

1. Click here to view the SBS Application guide and scroll down to find your bike and pad number (normally 3 digits)
2. Then either search for the 3 digit part number in the search bar at the top of this page, or scroll through the listings in our store to see if we have your model pads.

Note: Make sure you remember to order 2 X sets for twin disk front end if you have one. 

Please note: You will need to order 1 set per caliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: we only have limited stock and it is all listed on this site.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing above for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered.