SBS SI Brake Pads - Model No 584SI - suits Honda / Suzuki / Yamaha

SI Sinter

Free Shipping Australia Wide!

Time to grab yourself a bargain!

Description

SI (Sinter) is the perfect pad for the woods, desert or your next enduro adventure. SI is less aggressive than the RSI compound, but offer great feel and long pad life. Ideal for GNCC, National Enduro or Hare & Hound racing.

Model Number

584SI

Fitment - FRONT & REAR please contact us if you are unsure of front or rear fitment.

HONDA
CR 80 R 86- 91 SI
CR 80 R, RB 92- 95 RSI
CR 80 R, RB 96- 02 RSI
ATC 250 R 82- 84 SI
TRX 250 X Fourtrax 88- 92 SI SI
SUZUKI
RM 125 88 RSI
LT 230 85- 88 SI
LT 250 85- 87 SI
RM 250 87- 88 RSI
YAMAHA
YZ 125 89 RSI
YZ 250 89 RSI
YFM 300 Warrior 89 SI

Need to find the correct pad for your make / model / year bike?

1. Click here to view the SBS Application guide and scroll down to find your bike and pad number (normally 3 digits)
2. Then either search for the 3 digit part number in the search bar at the top of this page, or scroll through the listings in our store to see if we have your model pads.

Note: Make sure you remember to order 2 X sets for twin disk front end if you have one. 

Please note: You will need to order 1 set per caliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: we only have limited stock and it is all listed on this site.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing above for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered.