Ferodo Platinum Pads - FDB533P - Suits Honda CBR NSR 250/ CBR900RR 92-95

Free Shipping Australia Wide!

Description
Ferodo Platinum. This 'Non-Asbestos' organic compound provides the ‘soft' controlled braking force which is suitable for street and off-road applications.

• Highest coefficient of friction (braking force) available in an organic road friction material.
• Thermal underlay applied between backplate and friction material = less heat transfer
• Zinc alloy coated backplate – reduced corrosion and eliminates piston sticking
• Providing the 'soft' feel required by conservative riders
• Bedding-in of material required
• Performs equally well in wet and dry conditions
• Suitable for MX and Off-Road if a non sintered pad is required
• Excellent for front and rear
• Suitable for use with cast iron or stainless steel discs

Fitment - Please note all bike models may not be listed below. To find the correct brake pad for your bike please look up your bike on the Ferodo Parts Finder below then type the pad code into our search bar. If you cannot find the brake pad on our site please Contact Us as we will be able to supply it to you.

Ferodo Parts Finder: www.ferodoracing.com/ecat

HONDA
M CB 250 F/HORNET 250 1996 2001 F
M CBR 250 R - RR 250 1990 1994 F
M NSR 250 R 250 1988 1993 F
M NSR 250 R SP 250 1988 1993 F
M RS 250 R 250 1991 F
M NTV 400 BROS 400 1988 F
M VTR 400 R (NC 30) 400 1989 1991 F
M NTV 600 BROSS 600 1988 1992 F
M NTV 650 BROS - I 650 1990 1993 F
M NR 750 750 1992 F
M VFR 750 R (RC-30) 750 1988 1993 F
M CB 900 HORNET 900 2002 F
M CBR 900 RR-FIREBLADE (SC28) 900 1992 1995 F
M CB 1000 SF 1000 1993 1997 F
M CBR 1000 BIG ONE 1000 1993 1997 F
M VTR 1000 FV FIRESTORM - SUPERHAWK 1000 1997 2000 F
M CB 1300 X4 1300 1997 2000 F

ST = Sintergrip
SG = Sintergrip Off Road
P = Platinum
EF = Eco Friction
AG = Argento
CP1 = Race
STAC = Array Cooling (Track Day)
XRAC = Array Cooling (Race)
 

Please note: You will need to order 1 set per calliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing in the pics for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered. 

We are an Australian-owned and operating business