Ferodo Sintered Pads - FDB2079ST - Suits Honda / CBR600 900RR / Kawasaki / ZX6R

Free Shipping Australia Wide!

Description

ST – SINTERGRIP ROAD - The Next Generation Pad for the High-Performance Sportsbike
A full sintered compound that will deliver the braking performance to tame the power of the latest Sportsbikes.

• Highest coefficient of friction (braking force) available in an AM road friction material. (HH Friction Rating)
• Highest mechanical bonding possible between friction material and backplate
• Copper coated backplate – reduced corrosion and eliminates piston sticking
• Minimal bedding-in of material
• Three times the pad life of competitive organic products
• 20% less disc wear than competitive sintered compounds
• Performs equally well in wet and dry conditions
• Excellent for front and rear
• Do not use with cast iron discs – stainless discs OK

Fitment - Please note all bike models may not be listed below. To find the correct brake pad for your bike please look up your bike on the Ferodo Parts Finder below then type the pad code into our search bar. If you cannot find the brake pad on our site please Contact Us as we will be able to supply it to you.

Ferodo Parts Finder: www.ferodoracing.com/ecat

HONDA
M CB 400 SUPER FOUR (SF) 400 1999 2003 F
M CBR 600 F4 / F4i Sport 600 1999 2004 F
M CBR 600 FX / FY 600 1999 2000 F
M CBR 600 F1 / F2 / FS1 / FS2 Sport 600 2001 2002 F
M CBR 600 F 600 2007 F
M CBR 600 RR 600 2003 2004 F
M CBR 900 RR-FIREBLADE (SC33) 900 1998 1999 F
M CBR 900 RR-FIREBLADE (SC44&50) 900 2000 2003 F
M CBR 929 RR-FIREBLADE 929 2000 2001 F
M VTR 1000 SP-1 (SC45) 1000 2000 2001 F
M VTR 1000 SP-2 (SC45) 1000 2002 F
M CB 1100 EX 1100 2015 F
M CB 1300 1300 2001 F
KAWASAKI
M ZX-6R Ninja 636 95 2019 F
M ZX 6R 636 NINJA 636 2013 F

ST = Sintergrip
SG = Sintergrip Off Road
P = Platinum
EF = Eco Friction
AG = Argento
CP1 = Race
STAC = Array Cooling (Track Day)
XRAC = Array Cooling (Race)
 

Please note: You will need to order 1 set per calliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing in the pics for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered. 

We are an Australian-owned and operating business