Ferodo SinterGrip Pads - FDB2015SG - Suits Kawasaki / Yamaha YZ80

Free Shipping Australia Wide!

Description

SG - SINTERGRIP OFF-ROAD - The New World Leader in the Dirt Bike Arena
The #1 sintered compound that out-performs in dry or wet conditions.

• Highest mechanical bonding possible between friction material and backplate
• Minimal bedding-in of material
• Three times the pad life of organic products
• Copper coated backplate – reduced corrosion and eliminates piston sticking
• Excellent performance and stability at low temps
• Works equally well in wet and dry conditions – designed to disperse abrasive particles in extreme muddy conditions
• Excellent for front and rear
• Suitable for stainless steel discs only

Fitment - Please note all bike models may not be listed below. To find the correct brake pad for your bike please look up your bike on the Ferodo Parts Finder below then type the pad code into our search bar. If you cannot find the brake pad on our site please Contact Us as we will be able to supply it to you.

Ferodo Parts Finder: www.ferodoracing.com/ecat

KAWASAKI
M KLE 250 ANHELO 250 2000 2002 R
YAMAHA
M DT 50 LCD 50 1996 1998 F
M YZ 65 65 2018 F
M YZ 80 80 1986 1992 F
M YZ 80 80 1993 2001 F
M YZ 85 LW 85 2002 F
M TT-R 125 LW 125 2000 2012 F

ST = Sintergrip
SG = Sintergrip Off Road
P = Platinum
EF = Eco Friction
AG = Argento
CP1 = Race
STAC = Array Cooling (Track Day)
XRAC = Array Cooling (Race)
 

Please note: You will need to order 1 set per calliper for Twin Disk front end. If you have twin rotors you will need to order 2 X sets of pads.

Please note: Product photos may not represent the exact shape of the pad listed - please check the technical drawing in the pics for exact pad shape.

Bedding-in: this is a particularly important procedure for all compounds. The pads are bedded in by applying the brakes lightly several times and ending with a firm bite, leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds than for sintered. 

We are an Australian-owned and operating business